PROJECT-51: I finally have the block, the head, and the crankshaft back from the machine shops. After masking and several coats of MG-red engine paint, I can start the reassembly!
 |
| Engine during tear-down. |
 |
| Stripped engine block. |
 |
| Finally back from the shop with .120" overbore. |
 |
| Installing new core plugs. |
 |
| Head as removed from engine. |
 |
| Combustion chambers. |
 |
| Note clogged water-jacket holes. |
 |
| Head was bead-blasted and received new valve guides. |
 |
| Valves were reseated and gasket surface was machined flat. |
 |
| Crank was ground .020" undersize. |
No comments:
Post a Comment